GdPicture.NET.14
GdPicture14 Namespace / GdPicturePDF Class / BeginPath Method
The horizontal (X) coordinate of the new current point, expressed in the current units specified by the SetMeasurementUnit method with respect to the defined origin, related to the currently selected page.
The vertical (Y) coordinate of the new current point, expressed in the current units specified by the SetMeasurementUnit method with respect to the defined origin, related to the currently selected page.
Example





In This Topic
BeginPath Method (GdPicturePDF)
In This Topic
Begins a new subpath, defined within a currently selected page of the loaded PDF document, by moving the current point to the newly specified coordinates (DstX, DstY), omitting any connecting line segment. More precisely, this method sets the path construction operator "m".

The coordinates of the specified point need to be set in the current units defined in the PDF document with respect to the currently located origin, related to the actual page. You can simply use the GdPicturePDF.GetMeasurementUnit method to determine the currently defined units and you can easily use the GdPicturePDF.SetMeasurementUnit method to reset the units according to your preference.

Syntax
'Declaration
 

Public Function BeginPath( _
   ByVal DstX As Single, _
   ByVal DstY As Single _
) As GdPictureStatus
public GdPictureStatus BeginPath( 
   float DstX,
   float DstY
)
public function BeginPath( 
    DstX: Single;
    DstY: Single
): GdPictureStatus; 
public function BeginPath( 
   DstX : float,
   DstY : float
) : GdPictureStatus;
public: GdPictureStatus BeginPath( 
   float DstX,
   float DstY
) 
public:
GdPictureStatus BeginPath( 
   float DstX,
   float DstY
)

Parameters

DstX
The horizontal (X) coordinate of the new current point, expressed in the current units specified by the SetMeasurementUnit method with respect to the defined origin, related to the currently selected page.
DstY
The vertical (Y) coordinate of the new current point, expressed in the current units specified by the SetMeasurementUnit method with respect to the defined origin, related to the currently selected page.

Return Value

A member of the GdPictureStatus enumeration. If the method has been successfully followed, then the return value is GdPictureStatus.OK.

We strongly recommend always checking this status first.

Remarks
This method is only allowed for use with non-encrypted documents.

For further assistance, please see the Path Construction and Painting section of the GdPicturePDF class in the Reference Guide, as well as the Path Construction Operators section in the PDF Reference.

Example
How to define a new current point for the current path, in other words how to begin a new path construction. 
Dim caption As String = "Example: BeginPath"
Dim gdpicturePDF As New GdPicturePDF()
Dim status As GdPictureStatus = gdpicturePDF.NewPDF()
If status = GdPictureStatus.OK Then
    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft)
    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter)
    If (gdpicturePDF.NewPage(210, 297) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.SetLineWidth(2) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.SetLineColor(255, 0, 0) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.SetFillColor(138, 43, 226) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.BeginPath(100, 10) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(20, 50) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(190, 50) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.ClosePath() = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.StrokePath() = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.BeginPath(100, 80) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(20, 120) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(190, 120) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.ClosePath() = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.FillPath() = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.BeginPath(100, 150) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(20, 200) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(190, 200) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.CloseAndFillAndStrokePath() = GdPictureStatus.OK) Then
        status = gdpicturePDF.SaveToFile("test_BeginPath1.pdf")
        If status = GdPictureStatus.OK Then
            MessageBox.Show("The example has been followed successfully and the file has been saved.", caption)
        Else
            MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption)
        End If
    Else
        MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption)
    End If
Else
    MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption)
End If
gdpicturePDF.Dispose()
string caption = "Example: BeginPath";
GdPicturePDF gdpicturePDF = new GdPicturePDF();
GdPictureStatus status = gdpicturePDF.NewPDF();
if (status == GdPictureStatus.OK)
{
    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft);
    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter);
    if ((gdpicturePDF.NewPage(210, 297) == GdPictureStatus.OK) &&
        (gdpicturePDF.SetLineWidth(2) == GdPictureStatus.OK) &&
        (gdpicturePDF.SetLineColor(255, 0, 0) == GdPictureStatus.OK) &&
        (gdpicturePDF.SetFillColor(138, 43, 226) == GdPictureStatus.OK) &&
        (gdpicturePDF.BeginPath(100, 10) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(20, 50) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(190, 50) == GdPictureStatus.OK) &&
        (gdpicturePDF.ClosePath() == GdPictureStatus.OK) &&
        (gdpicturePDF.StrokePath() == GdPictureStatus.OK) &&
        (gdpicturePDF.BeginPath(100, 80) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(20, 120) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(190, 120) == GdPictureStatus.OK) &&
        (gdpicturePDF.ClosePath() == GdPictureStatus.OK) &&
        (gdpicturePDF.FillPath() == GdPictureStatus.OK) &&
        (gdpicturePDF.BeginPath(100, 150) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(20, 200) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(190, 200) == GdPictureStatus.OK) &&
        (gdpicturePDF.CloseAndFillAndStrokePath() == GdPictureStatus.OK))
    {
        status = gdpicturePDF.SaveToFile("test_BeginPath1.pdf");
        if (status == GdPictureStatus.OK)
            MessageBox.Show("The example has been followed successfully and the file has been saved.", caption);
        else
            MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption);
    }
    else
        MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption);
}
else
    MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption);
gdpicturePDF.Dispose();
Dim caption As String = "Example: BeginPath"
Dim gdpicturePDF As New GdPicturePDF()
Dim status As GdPictureStatus = gdpicturePDF.NewPDF()
If status = GdPictureStatus.OK Then
    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft)
    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter)
    If (gdpicturePDF.NewPage(210, 297) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.SetLineWidth(2) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.SetLineColor(255, 0, 0) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.SetFillColor(138, 43, 226) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.BeginPath(100, 10) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(20, 50) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(190, 50) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.StrokePath() = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.BeginPath(100, 80) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(20, 120) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(190, 120) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.ClosePath() = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.StrokePath() = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.BeginPath(100, 150) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(20, 200) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.AddLineToPath(190, 200) = GdPictureStatus.OK) AndAlso
       (gdpicturePDF.CloseAndStrokePath() = GdPictureStatus.OK) Then
        status = gdpicturePDF.SaveToFile("test_BeginPath2.pdf")
        If status = GdPictureStatus.OK Then
            MessageBox.Show("The example has been followed successfully and the file has been saved.", caption)
        Else
            MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption)
        End If
    Else
        MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption)
    End If
Else
    MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption)
End If
gdpicturePDF.Dispose()
string caption = "Example: BeginPath";
GdPicturePDF gdpicturePDF = new GdPicturePDF();
GdPictureStatus status = gdpicturePDF.NewPDF();
if (status == GdPictureStatus.OK)
{
    gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft);
    gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter);
    if ((gdpicturePDF.NewPage(210, 297) == GdPictureStatus.OK) &&
        (gdpicturePDF.SetLineWidth(2) == GdPictureStatus.OK) &&
        (gdpicturePDF.SetLineColor(255, 0, 0) == GdPictureStatus.OK) &&
        (gdpicturePDF.SetFillColor(138, 43, 226) == GdPictureStatus.OK) &&
        (gdpicturePDF.BeginPath(100, 10) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(20, 50) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(190, 50) == GdPictureStatus.OK) &&
        (gdpicturePDF.StrokePath() == GdPictureStatus.OK) &&
        (gdpicturePDF.BeginPath(100, 80) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(20, 120) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(190, 120) == GdPictureStatus.OK) &&
        (gdpicturePDF.ClosePath() == GdPictureStatus.OK) &&
        (gdpicturePDF.StrokePath() == GdPictureStatus.OK) &&
        (gdpicturePDF.BeginPath(100, 150) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(20, 200) == GdPictureStatus.OK) &&
        (gdpicturePDF.AddLineToPath(190, 200) == GdPictureStatus.OK) &&
        (gdpicturePDF.CloseAndStrokePath() == GdPictureStatus.OK))
    {
        status = gdpicturePDF.SaveToFile("test_BeginPath2.pdf");
        if (status == GdPictureStatus.OK)
            MessageBox.Show("The example has been followed successfully and the file has been saved.", caption);
        else
            MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption);
    }
    else
        MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption);
}
else
    MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption);
gdpicturePDF.Dispose();
Example
How to define a new current point for the current path, in other words how to begin a new path construction. Dim caption As String = "Example: BeginPath" Dim gdpicturePDF As New GdPicturePDF() Dim status As GdPictureStatus = gdpicturePDF.NewPDF() If status = GdPictureStatus.OK Then gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft) gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter) If (gdpicturePDF.NewPage(210, 297) = GdPictureStatus.OK) AndAlso (gdpicturePDF.SetLineWidth(2) = GdPictureStatus.OK) AndAlso (gdpicturePDF.SetLineColor(255, 0, 0) = GdPictureStatus.OK) AndAlso (gdpicturePDF.SetFillColor(138, 43, 226) = GdPictureStatus.OK) AndAlso (gdpicturePDF.BeginPath(100, 10) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(20, 50) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(190, 50) = GdPictureStatus.OK) AndAlso (gdpicturePDF.ClosePath() = GdPictureStatus.OK) AndAlso (gdpicturePDF.StrokePath() = GdPictureStatus.OK) AndAlso (gdpicturePDF.BeginPath(100, 80) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(20, 120) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(190, 120) = GdPictureStatus.OK) AndAlso (gdpicturePDF.ClosePath() = GdPictureStatus.OK) AndAlso (gdpicturePDF.FillPath() = GdPictureStatus.OK) AndAlso (gdpicturePDF.BeginPath(100, 150) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(20, 200) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(190, 200) = GdPictureStatus.OK) AndAlso (gdpicturePDF.CloseAndFillAndStrokePath() = GdPictureStatus.OK) Then status = gdpicturePDF.SaveToFile("test_BeginPath1.pdf") If status = GdPictureStatus.OK Then MessageBox.Show("The example has been followed successfully and the file has been saved.", caption) Else MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption) End If Else MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption) End If Else MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption) End If gdpicturePDF.Dispose() string caption = "Example: BeginPath"; GdPicturePDF gdpicturePDF = new GdPicturePDF(); GdPictureStatus status = gdpicturePDF.NewPDF(); if (status == GdPictureStatus.OK) { gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft); gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter); if ((gdpicturePDF.NewPage(210, 297) == GdPictureStatus.OK) && (gdpicturePDF.SetLineWidth(2) == GdPictureStatus.OK) && (gdpicturePDF.SetLineColor(255, 0, 0) == GdPictureStatus.OK) && (gdpicturePDF.SetFillColor(138, 43, 226) == GdPictureStatus.OK) && (gdpicturePDF.BeginPath(100, 10) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(20, 50) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(190, 50) == GdPictureStatus.OK) && (gdpicturePDF.ClosePath() == GdPictureStatus.OK) && (gdpicturePDF.StrokePath() == GdPictureStatus.OK) && (gdpicturePDF.BeginPath(100, 80) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(20, 120) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(190, 120) == GdPictureStatus.OK) && (gdpicturePDF.ClosePath() == GdPictureStatus.OK) && (gdpicturePDF.FillPath() == GdPictureStatus.OK) && (gdpicturePDF.BeginPath(100, 150) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(20, 200) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(190, 200) == GdPictureStatus.OK) && (gdpicturePDF.CloseAndFillAndStrokePath() == GdPictureStatus.OK)) { status = gdpicturePDF.SaveToFile("test_BeginPath1.pdf"); if (status == GdPictureStatus.OK) MessageBox.Show("The example has been followed successfully and the file has been saved.", caption); else MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption); } else MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption); } else MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption); gdpicturePDF.Dispose(); Dim caption As String = "Example: BeginPath" Dim gdpicturePDF As New GdPicturePDF() Dim status As GdPictureStatus = gdpicturePDF.NewPDF() If status = GdPictureStatus.OK Then gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft) gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter) If (gdpicturePDF.NewPage(210, 297) = GdPictureStatus.OK) AndAlso (gdpicturePDF.SetLineWidth(2) = GdPictureStatus.OK) AndAlso (gdpicturePDF.SetLineColor(255, 0, 0) = GdPictureStatus.OK) AndAlso (gdpicturePDF.SetFillColor(138, 43, 226) = GdPictureStatus.OK) AndAlso (gdpicturePDF.BeginPath(100, 10) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(20, 50) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(190, 50) = GdPictureStatus.OK) AndAlso (gdpicturePDF.StrokePath() = GdPictureStatus.OK) AndAlso (gdpicturePDF.BeginPath(100, 80) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(20, 120) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(190, 120) = GdPictureStatus.OK) AndAlso (gdpicturePDF.ClosePath() = GdPictureStatus.OK) AndAlso (gdpicturePDF.StrokePath() = GdPictureStatus.OK) AndAlso (gdpicturePDF.BeginPath(100, 150) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(20, 200) = GdPictureStatus.OK) AndAlso (gdpicturePDF.AddLineToPath(190, 200) = GdPictureStatus.OK) AndAlso (gdpicturePDF.CloseAndStrokePath() = GdPictureStatus.OK) Then status = gdpicturePDF.SaveToFile("test_BeginPath2.pdf") If status = GdPictureStatus.OK Then MessageBox.Show("The example has been followed successfully and the file has been saved.", caption) Else MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption) End If Else MessageBox.Show("The example has not been followed successfully." + vbCrLf + "The last known status is " + gdpicturePDF.GetStat().ToString(), caption) End If Else MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption) End If gdpicturePDF.Dispose() string caption = "Example: BeginPath"; GdPicturePDF gdpicturePDF = new GdPicturePDF(); GdPictureStatus status = gdpicturePDF.NewPDF(); if (status == GdPictureStatus.OK) { gdpicturePDF.SetOrigin(PdfOrigin.PdfOriginTopLeft); gdpicturePDF.SetMeasurementUnit(PdfMeasurementUnit.PdfMeasurementUnitMillimeter); if ((gdpicturePDF.NewPage(210, 297) == GdPictureStatus.OK) && (gdpicturePDF.SetLineWidth(2) == GdPictureStatus.OK) && (gdpicturePDF.SetLineColor(255, 0, 0) == GdPictureStatus.OK) && (gdpicturePDF.SetFillColor(138, 43, 226) == GdPictureStatus.OK) && (gdpicturePDF.BeginPath(100, 10) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(20, 50) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(190, 50) == GdPictureStatus.OK) && (gdpicturePDF.StrokePath() == GdPictureStatus.OK) && (gdpicturePDF.BeginPath(100, 80) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(20, 120) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(190, 120) == GdPictureStatus.OK) && (gdpicturePDF.ClosePath() == GdPictureStatus.OK) && (gdpicturePDF.StrokePath() == GdPictureStatus.OK) && (gdpicturePDF.BeginPath(100, 150) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(20, 200) == GdPictureStatus.OK) && (gdpicturePDF.AddLineToPath(190, 200) == GdPictureStatus.OK) && (gdpicturePDF.CloseAndStrokePath() == GdPictureStatus.OK)) { status = gdpicturePDF.SaveToFile("test_BeginPath2.pdf"); if (status == GdPictureStatus.OK) MessageBox.Show("The example has been followed successfully and the file has been saved.", caption); else MessageBox.Show("The example has been followed successfully, but the file can't be saved. Status: " + status.ToString(), caption); } else MessageBox.Show("The example has not been followed successfully.\nThe last known status is " + gdpicturePDF.GetStat().ToString(), caption); } else MessageBox.Show("The NewPDF() method has failed with the status: " + status.ToString(), caption); gdpicturePDF.Dispose();
See Also

Reference

GdPicturePDF Class
GdPicturePDF Members
GetMeasurementUnit Method
SetMeasurementUnit Method
AddLineToPath Method
ClosePath Method
StrokePath Method
FillPath Method
SetMeasurementUnit Method
SetOrigin Method

 

 

Ⓒ Copyright 2024 Nutrient. All rights reserved